The winter season can be a drag on your energy bill. Luckily, energy efficiency experts have compiled loads of useful measures to make heating your living space more efficient – whether you’re a homeowner or a renter. We chatted with Doug Anderson, a project manager from the EPA’s Energy Star program, for tips and tricks on how renters and owners can prep for the winter.
1. Leaving the house? Lower your thermostat to save cash
Is your energy bill a bit higher than you’d like? Don’t worry, thrifty renter. By following a few simple steps from Energy Star, you can save $180 per year on your heating and cooling bill.
For starters, set back your thermostat by 8 degrees Fahrenheit while you are away or asleep to prevent wasted energy. If you have a programmable thermostat in your apartment or rental unit, Anderson suggests pre-setting the thermostat to reduce temperature when you leave for work or school and programming it to reach your desired temperature about a half hour before you get home for a “warm welcome.”
Since you don’t need to heat your kitchen while you’re snuggled under the blankets at bedtime, program your thermostat to decrease the temperature while you’re sleeping as well, and pre-set it to power back on about a half hour before you wake up.
If you don’t have a programmable thermostat, Anderson assures us that you can achieve comparable results by changing your settings manually. Simply lower the temperature before you go to sleep or leave the house, and raise it when you wake up or arrive home to start realizing energy savings.
2. Don’t forget your storm windows
“In the fall, people like to leave their windows open and enjoy the nice weather. But often times they forget to close the glass panel to cover the screens on their storm windows,” Anderson says.
Storm windows are designed to maintain a layer of air between your home and the outdoors, improving heat retention. Leaving the exterior portion of your storm windows open allows warm air to easily escape your home – meaning you’re essentially paying loads of extra money to heat your front yard.
Save some cash and reduce energy use by making sure all of your storm windows are securely shut. If you notice that one of your storm windows does not fully close, notify your landlord immediately to prevent wasted energy.
3. Use temporary solutions to fix leaks
Sealing drafty windows or leaky duct-work is a common green tip, but many landlords prohibit tenants from making modifications to their apartment or rental unit. So, what’s a planet-friendly renter to do? Skip the caulk and permanent weather stripping in favor of temporary solutions that can help you achieve similar results without damaging your rental.
If you notice cold air coming in around your windows, Anderson suggests using shrink-to-fit insulating film – which reduces drafts and can be easily removed with no damage to your walls or windows. To ensure scuff-free results, be sure to leave at least an inch of space between the plastic and your window, and never apply the sheets to directly to window glass. Pick up insulating film, such as these kits from 3M and WJ Dennis, at your local hardware store.
Rather than using standard caulk, renters can easily seal up leaks by using temporary rope caulk, says Anderson. This simple alternative comes in pre-cut strands for easy application and is completely removable – meaning less wasted energy without sacrificing that $1,000 deposit. Pick up a pack of rope caulk, like this one from Duck Brand, at your local hardware store or home improvement retailer.
If you have a window air conditioning unit that cannot be removed, this can also contribute to uncomfortably cold drafts in your apartment, Anderson says. Solve the problem with an indoor or outdoor air conditioner cover, and you’ll notice a far less drafty living space.
4. Redecorate for energy savings
Take a moment to do a little energy-saving feng shui around your apartment. Make sure all air registers, radiators and baseboard heaters are completely free of obstruction, Anderson suggests.
If you have furniture or drapery positioned directly in front of an air register or heater, the heat will not circulate into your room as well – which could lead you to unnecessarily crank up the thermostat. Try to leave at least a foot of space around your air registers for maximum efficiency.
5. Don’t be afraid to ask your landlord
Whether your heating system is downstairs in the basement or you use a self-contained furnace inside your apartment or in a closet, you should never touch the system without your landlord present. But don’t be afraid to ask about heating system maintenance and other energy-related concerns.
Ask your landlord if he or she schedules pre-season check-ups of heating and cooling systems and how often air filters are changed. Air filters should be changed every three months to ensure maxiumum efficiency, Anderson says.
For personalized energy-saving information that is specific to your area, check out Energy Star’s Home Advisor. Just type in your ZIP code, answer a few quick questions about your apartment or rental unit, and you’ll get a list of tips created just for you.